﻿================================================================================
*** Malwarebytes Release Notes ***
================================================================================
This is a catalog of all the release notes for the Malwarebytes Toolset.

If you need additional support, please visit https://support.malwarebytes.com/hc/en-us/categories/360002458154-Malwarebytes-Toolset

----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.8.2.1547 Release Notes - 11/05/2021
----------------------------------------------------------------------
Inform:
- Updated Operating System tile with the following improvements:
	- Detect and report if Windows 10 v21H1 (19043.1288 or higher) is not installed on a Windows 10 device (Inform > System > Operating System)
	- Improved detection and reporting logic to support Windows 11, Server 2019, and Server 2022

Malwarebytes Issue Scanner:
- Updated the following Issue Scanner components to support Windows 11 v21H2 (Build 22000.x):
	- Default Services Issue Scanner
	- Default Registry Values Issue Scanner
	- File Associations Issue Scanner
	- Installed Services Issue Scanner
	- Safe Mode Services Issue Scanner
	- Winsock Issue Scanner

Network Devices Scanner:
- Updated OUI database to support more device vendors

Malwarebytes Toolset Logging:
- Improved Toolset logging output capabilities
- Fixed a bug that caused logging to fail when specifying LogLevel via CLI

Malwarebytes Toolset Licensing:
- Enhanced error messaging for when license validation fails in certain scenarios.

Malwarebytes Portable Scanner:
- Fixed a bug that caused definition database updates to fail and the Toolset to crash if the FIPS Mode GPO is enabled

Malwarebytes Toolset Updater
- Added support for obtaining Malwarebytes Portable Scanner 4.x database updates when FIPS Mode GPO is enabled

General Technical Limitations:
- SMART Attributes and SMART Status Check may be skipped on disk drives for one or more of the following reasons due to technical limitations:
	- The disk drive does not support SMART or a particular SMART Attribute
	- External storage device that does not provide SMART Passthrough
	- The disk drive uses NVMe and is running Windows 7/8.1 (NVMe support is only on Windows 10 due to OS limitations)
- You may experience issues with the following components if .NET 4.5 Framework or higher is not installed:
	- Malwarebytes Portable Scanner
		- On systems without .NET Framework 4.x: Use Malwarebytes Breach Remediation (MBBR) which is included in the following areas:
			- Toolbox > Remediate > MBBR CLI Scan or MBBR Command Prompt
			- MBBR for Windows (v4.x) x64: Malwarebytes\MBBRv4\x64\mbbr.exe
			- MBBR for Windows (v4.x) x86: Malwarebytes\MBBRv4\x86\mbbr.exe
			- MBBR for Windows (v3.x) x64: Malwarebytes\MBBRv3\x64\mbbr.exe
			- MBBR for Windows (v3.x) x86: Malwarebytes\MBBRv3\x86\mbbr.exe
			- MBBR for Windows Legacy (v2.x): Malwarebytes\MBBRv2\mbbr.exe
	- Malwarebytes Issuer Scanner
	- Network Devices Scanner
	- Check for Updates (MBTS Updater)
	- Malwarebytes Anti-Bundleware
- Windows XP and Vista are not supported. Please use the following legacy products instead:
	- Malwarebytes Toolset 1.3.1.1119 - https://malwarebytes.box.com/v/MBTS131 or https://malwarebytes.box.com/v/MBTS131Full
	- Malwarebytes Breach Remediation 2.x CLI (MBBR for Windows Legacy) - Included with MBTS, after updating via Check for Updates, or https://downloads.malwarebytes.com/file/mbbr
	- Malwarebytes for Windows Legacy (3.5.1.2522) - Included with MBTS Full, after updating via Check for Updates, or https://downloads.malwarebytes.com/file/mb3_legacy
- Windows Server (2008 R2 and higher) and Windows Insider Preview will have the following limitations:
	- Malwarebytes Issue Scanner items that rely on OS Profile Data will be skipped. See the Malwarebytes Issue Scanner Technical Reference for more details.




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.8.1.1541 Release Notes - 06/21/2021
----------------------------------------------------------------------
Inform:
- Updated Operating System tile to report if Windows 10 v21H1 (19043.985 or higher) is not installed on a Windows 10 device (Inform > System > Operating System)

Malwarebytes Issue Scanner:
- Updated the following Issue Scanner components to support Windows 10 v21H1 (Build 19043.x):
	- Default Services Issue Scanner
	- Default Registry Values Issue Scanner
	- File Associations Issue Scanner
	- Installed Services Issue Scanner
	- Safe Mode Services Issue Scanner
	- Winsock Issue Scanner

Network Devices Scanner:
- Updated OUI database to support more device vendors

Malwarebytes Portable Scanner:
- Fixed a bug that caused ignoring of the Download Updates scan setting in certain scenarios




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.8.0.1497 Release Notes - 04/16/2021
----------------------------------------------------------------------

Crash Dump Analyzer:
- Fixed a bug that caused analysis to report wrong/missing symbols due to being unable to download symbol files from Microsoft's servers

Inform:
- Updated Inform Engine for future capabilities
- Updated Operating System tile to report if Windows 10 Version 20H2 (19042.928 or higher) is not installed on a Windows 10 device (Inform > System > Operating System)




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.8.0.1456 Release Notes - 02/19/2021
----------------------------------------------------------------------

Malwarebytes Issue Scanner:
- Rearchitected Disk Drive Issue Scanner with the following enhancements:
	- Improved output for SMART Error Log entries and SMART Attribute errors
	- Rebuilt engine to utilize JSON based processing
	- Refined SMART Attribute error detection logic
- Updated Disk Drive Issue Scanner SMART Attributes engine to version 7.2.1 with the following enhancements:
	- Improved support and bug fixes for internal and external HDDs and SSDs
	- Improved support and bug fixes for NVMe devices
	- Improved support and bug fixes for USB bridge/passthrough devices
- Updated the following Issue Scanner components to support Windows 10 v20H2 (Build 19042.x):
	- Default Services Issue Scanner
	- Default Registry Values Issue Scanner
	- File Associations Issue Scanner
	- Installed Services Issue Scanner
	- Safe Mode Services Issue Scanner
	- Winsock Issue Scanner

Malwarebytes Portable Scanner:
- Updated to the Malwarebytes 4.x engine which provides the following updates:
	- Multi-layered engine that combines existing and new signature-less and signature-based technologies
	- Improved zero-hour detection of malware
	- Improved detection of malware families, including older malware
	- Enhanced remediation engine with the following improvements:
		- Improved removal of Chrome Browser infections
		- Better removal of Shortcuts and Tasks infections
		- Improved remediation of threats that have thousands of associated traces
- Updated logging logic with the following enhancements:
	- Improved logging detail
	- Log file persistence
- Fixed a bug that caused remediated malware to show a Result of Passed rather than Removed in the Repair Report
- Fixed a bug that caused the Text Summary Export to show an incorrect list of items removed

Malwarebytes Breach Remediation:
- Updated Malwarebytes Breach Remediation in the Remediate area of the Toolbox to version 4.x
- Added Malwarebytes Breach Remediation version 4.x (x64 and x86) to Malwarebytes\MBBRv4
	- Included with MBTS Full package (https://toolset.malwarebytes.com/file/mbts_full), downloaded on-demand via the Toolbox, or downloaded manually from MBTS Updater (Toolbox > MyTools > Check for Updates)
- Added MBBR for Windows Batch File v4 (Malwarebytes\MBBRv4\mbbrv4.cmd) to help with CLI automation of MBBR for Windows (v4.x and higher).
	- Includes support for the following optional parameters/switches:
		- /key YOUR-MBTS-KEY-HERE - Allows you to specify an MBTS or MBBR license key to use with the batch file
		- /auto - Performs a Threat Scan after automatically updating and registering the device. Requires use of the /key parameter.
	- Note: Windows 7 or higher is required

Malwarebytes Toolset Updater
- Added support for Malwarebytes Breach Remediation 4.x
- Added support for Malwarebytes Portable Scanner 4.x database updates

Network Devices Scanner:
- Updated OUI database to support more device vendors and improve storage footprint
- Fixed a bug that caused some known manufacturers to appear as Unknown

Toolbox
- Updated MBBR Command Prompt and MBBR CLI Scan (Toolbox > Remediate) to do the following:
	- On Windows 7 and higher: MBBR for Windows version 4.x and higher is utilized

Inform:
- Updated Operating System tile to report if Windows 10 Version 20H2 (19042.804 or higher) is not installed on a Windows 10 device (Inform > System > Operating System)




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.7.1.1418 Release Notes - 06/22/2020
----------------------------------------------------------------------

Malwarebytes Toolset Updater:
- Fixed a bug that may have caused updating/downloading Zip based standalone components to fail with an "Object reference not set to an instance of an object" error




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.7.0.1405 Release Notes - 06/12/2020
----------------------------------------------------------------------

Crash Dump Analyzer:
- Added functionality to report the critical process in the Analysis Summary when analyzing 0xEF CRITICAL_PROCESS_DIED based BSODs

Inform:
- Updated Operating System tile to report if Windows 10 Version 2004 (19041.329 or higher) is not installed on a Windows 10 device (Inform > System > Operating System)
- Updated logic used detecting security products registered to Windows Security Center
- Fixed a bug that could cause the same security product to report multiple times in the Security section

Malwarebytes Issue Scanner:
- Updated the following Issue Scanner components to support Windows 10 v2004 (Build 19041.x):
	- Default Services Issue Scanner
	- Installed Services Issue Scanner
	- Safe Mode Services Issue Scanner
	- File Associations Issue Scanner
	- Default Registry Values Issue Scanner
	- Winsock Issue Scanner
- Updated Disk Drive Issue Scanner's SMART Attributes capability to version 1.7.1 with the following enhancements:
	- Improved support and bug fixes for internal and external HDDs and SSDs
	- Improved support and bug fixes for NVMe devices
	- Improved support and bug fixes for USB bridge/passthrough devices
- Fixed a bug that could cause the Group Policy Issue Scanner to not properly detect the DisableCMD Group Policy

Malwarebytes Portable Scanner:
- Updated the Process Killer internal whitelist for the following products:
	- Dell Security Framework
	- Windows 10 v2004 (various updated OS and app components)

Malwarebytes Toolset Licensing:
- Added support for improved messaging for when license validation fails

Malwarebytes Toolset Updater:
- Added support for Malwarebytes Privacy for Windows Offline Installer
- Added support for Malwarebytes Endpoint Agent Deployment Tool
- Added support for Malwarebytes Windows Firewall Control

Network Devices Scanner:
- Updated OUI database to support more device vendors

Toolbox:
- Added Malwarebytes Privacy (Toolbox > Protect) to install Malwarebytes Privacy for Windows (Offline Installer)
- Added Endpoint Agent Deployment Tool (Toolbox > Protect) to assist with installing Malwarebytes Nebula/OneView managed products (e.g Incident Response, Endpoint Proteciton, Endpoint Protection and Response, etc.)
- Added Windows Firewall Control (Toolbox > Protect) to install Malwarebytes Windows Firewall Control
- Added Chkdsk Scan (Toolbox > Repair) to assist with detecting and fixing disk errors as well as attempt to recover bad sectors
- Improved the description of several Repair tools

Settings:
- Updated User Guide link to utilize dynamic URL: https://links.malwarebytes.com/support-Toolset-UserGuide




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.7.0.1405 Release Notes - 01/10/2020
----------------------------------------------------------------------

Inform:
- Added Asset Scan capability (early access feature) to support detailed device information output (all of Inform plus additional categories) to JSON and other future functionality
- Added early access to Asset Scan to JSON output from Command Line (MBTS.exe or MBTSLauncher.exe):
	- /scan:asset /LogFile:"PATH_TO_FILE" - Performs a silent Asset Scan and outputs the results in JSON format to the file specified.
	- If /LogFile is not specified, then the file is saved to %UserProfile%\Desktop\AssetScan_%DATE&TIME%.json
- Added support to acquire more details for the following Inform and Asset Scan Data Providers:
	- Programs (software_installed)
		- Version
		- Uninstall String (Asset Scan Only)
	- RAM/Memory:
		- Manufacturer
		- Part Number
	- Devices (Asset Scan Only)
		- PNP Device ID (Asset Scan Only)
		- Name (Asset Scan Only)
- Rearchitectured Inform to use a native object oriented input and output methods
- Updated Inform Data Providers to improve performance, stability, and level of detail
- Updated Windows Protection and Additional Protection tiles to use improved logic when reporting content from Windows Security Center
- Updated Additional Protection to support detecting and reporting additional info when modern Malwarebytes products are installed
- Updated "Install Malwarebytes" link to use Malwarebytes 4.x (Inform > Security > Additional Protection)
- Updated the Operating System tile to report if Windows 10 Version 1909 (18363.535 or higher) is not installed on a Windows 10 device (Inform > System > Operating System)
- Updated Details window for Boot History to use grouping and improved columns

MBTS.exe and MBTSLauncher.exe:
- Added new CLI option to perform an Asset Scan (early access feature)
	- /scan:asset /LogFile:"PATH_TO_FILE" - Performs a silent Asset Scan and outputs the results in JSON format to the file specified.
	- If /LogFile is not specified, then the file is saved to %UserProfile%\Desktop\AssetScan_%DATE&TIME%.json

Malwarebytes Portable Scanner:
- Fixed a regression bug that caused the Malwarebytes Portable Scanner to report scanning 1 object then finish when HFS metadata files are present in Toolset directories
- Updated the Process Killer internal whitelist for the following products:
	- AMD/ATI GPUs
	- FABs AutoBackup
	- Intel Dynamic Platform and Thermal Framework
	- Malwarebytes 4
	- Nvidia GPUs
	- SentinalOne
	- SolarWinds RMM
	- Splashtop
	- Synaptics
	- VMWare
	- Windows 10 v1803-v1909 (various updated OS and app components)

Malwarebytes Issue Scanner:
- Updated the following Issue Scanner components to support Windows 10 v1909 (Build 18363.xxx):
	- Default Services Issue Scanner
	- Installed Services Issue Scanner
	- Safe Mode Services Issue Scanner
	- File Associations Issue Scanner
	- Default Registry Values Issue Scanner
	- Winsock Issue Scanner

Malwarebytes Toolset Updater:
- Added support for Malwarebytes 4.x for Windows Offline Installer
- Fixed a regression bug that caused the MBTS Updater to fail due when HFS metadata files are present in Toolset directories
- Fixed a regression bug that caused MBTS.exe to hang or operate slowly when performing a Toolset Upgrade when HFS metadata files are present in Toolset directories

MyTools:
- Added support to require a Name when adding or editing a tool with the MyTools Editor
- Fixed a bug that caused Powershell scripts to attempt to execute without the expected ExecutionPolicy Bypass and NoProfile arguments (Thanks to CJ from onPhyia!!)
- Fixed a bug that caused Tile Preview to fail when adding a new tool before saving
- Fixed a bug that caused Tile Preview to fail if Properties fields are empty
- Fixed a bug that allowed you to add a tool without a name that would not appear in the MyTools area of the Toolbox

Network Devices Scanner:
- Updated OUI database to support more device vendors

Toolbox:
 - Updated Malwarebytes for Windows (Toolbox > Protect) to install Malwarebytes 4.x (Offline Installer)
 - Renamed Malwarebytes for Chrome to Browser Guard for Chrome
 - Renamed Malwarebytes for Firefox to Browser Guard for Firefox

 User Interface:
	- Fixed a spelling error in an error message when license validation fails




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.6.1.1380 Release Notes - 08/28/2019
----------------------------------------------------------------------

Crash Dump Analyzer:
	- Added Crash Dump Analyzer component to Malwarebytes Toolset (Inform > History > Blue Screens > Details) with the following features:
		- Detect and analyze crash dump files from the following locations:
			- %WinDir%\MiniDump\*.dmp
			- %WinDir%\MEMORY.DMP
		- Provide the following pre-analysis details:
			- Date - date and time when the crash occurred
			- Bugcheck Code - the actual error code of the BSOD/Bugcheck
			- Description - description of the crash based on the bugcheck/BSOD error code
			- Uptime - total time the operating system had been running for when the crash occurred
			- System State - estimated state the OS was in when the crash may have occurred
			- File Path - Path to the crash dump file
		- Analyze function to perform an in-depth analysis using the Debugging Tools for Windows v10.18362.1 for providing the following:
			- Analysis Summary with the following details:
				- Crash Information with the Operating System (with version, Architecture, and Build), Timestamp, Up Time (of the OS), Stop Code (with error code, error message, and detailed description), Arguments, and Bucket ID.
				- Probably Caused By details with Path, Company Name, Description, Product Name, File Version, Product Version, Last Modified date, and a Comment if the driver is identical, different, or missing on the system
					- NOTE: Some fields will not show if the file is missing or different on the current system.
			- Stack Trace with the following details:
				- Call Stack - the ordered list of modules, their called function, and arguments from when the crash occurred
				- Relevant Modules - list of modules from the Call Stack with details on the Path, Company Name, Description, Last Modified date, and the Current State of the module (e.g. identical, different, or missing)
					- NOTE: Some fields will not show if the file is missing or different on the current system.
			- Raw Output - Complete raw text output from WinDBG for manual inspection and additional raw technical details
		- Debugging Tools for Windows (x86 and x64) v10.18362.1 component files are stored in the following 7z files until an Analysis is performed:
			- x86: Malwarebytes\MBTS\WinDBG_x86.7z
			- x64: Malwarebytes\MBTS\x64\WinDBG_x64.7z
		- NOTE: Internet access is required to obtain symbol files from Microsoft to provide an effective and accurate crash dump analysis
		- NOTE: You can use the right-click context menu on any field to "Copy String" contents to the Clipboard
		- NOTE: You can highlight, use common keyboard shortcuts, or the right-click context menu to copy content from the Raw Output tab

Inform:
	- Added Crash Dump Analyzer component to Blue Screens tile Details view under History
	- Added improved detection and results of Display information in Remote Desktop scenarios
	- Updated the Operating System tile to report if Windows 10 Version 1903 (18362.295 or higher) is not installed on a Windows 10 device (Inform > System > Operating System)
	- Fixed a bug that caused Bug Check Code Details to be missing or incomplete for BSODs that occurred on Windows 10 v1903

Malwarebytes Portable Scanner:
	- Updated scan engine and controllers to version 3.8.3 with the following enhancements/changes:
		- Improved overall performance, accuracy, and stability with malware detection and removal
		- Bug fix to prevent a BSOD from occurring while performing a rootkit scan in certain conditions
	- Updated Process Killer whitelist to include new critical processes for Windows, SyncroMSP, Microsoft Surface, and Malwarebytes Cloud
	- Fixed a bug that caused the Process Killer to kill LSAIso.exe (Local Security Authority Isolation Process) on Windows 10 systems that could result in a 0x000000EF BSOD (CRITICAL_PROCESS_DIED)

Malwarebytes Issue Scanner:
	- Fixed a bug that caused Default Value Issue Scanners remediation/repair actions to reurn as an Informational object rather than Repair object

Network Devices Scanner:
	- Added default Gaming Console item to Edit Device Type list
	- Updated the scan engine logic to improve detection of devices that may be in a connected standby or connected low power mode
	- Updated OUI database to support more device vendors
	- Updated the default icon for Security Camera, Network Scanner, HVAC, and IoT devices

Runtimes and OS Support:
	- Added message box to inform users when attempting to run the Malwarebytes Toolset on unsupported legacy operating systems (e.g. Windows 2000, XP, Vista, etc.)
	- Added and fixed UI elements to inform users of areas that are not populating/accessable when .NET 4.x runtimes are not accessable
	- Fixed a bug that caused the Malwarebytes Toolset to crash on supported operating systems that are missing .NET 4.x runtimes
	- Fixed a bug that caused the default web browser to launch as Administrator if the default web browser was not already running
	- Fixed a bug that caused explorer.exe to launch as Administrator if explorer.exe or the Windows Shell was not already running
	- Updated all Malwarebytes Toolset components to compile using Visual Studio 2017 and universal API runtimes for improved functionality and performance

Search:
	- Fixed a bug that caused Network Reset and WMI Reset to appear as results when search for "Malwarebytes" or "MBTS".

User Interface:
	- Fixed a bug that caused the Malwarebytes Toolset Taskbar Icon to appear blurry when running at 125% DPI scaling and above




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.6.0.1316 Release Notes - 06/11/2019
----------------------------------------------------------------------

Changes/Improvements:
- Added MBTS Search with the following functionality:
	- Interactive Search box with a flyout window that returns indexed items from within MBTS and select areas of the OS in realtime
	- Support for searching the following data points for a given indexed item:
		- Name
		- Vendor
		- Path to File/Binary
		- File Extension
		- Tags
	- CTRL + f keybaord shortcut to jump to the Search box
	- Support for returning results from the following areas:
		- Any item added via MyTools
			- Note: Search tags for MyTools items can be controlled via the MyTools Editor
		- Any item from the following areas of the Toolbox:
			- MyTools
			- Protect
			- Remediate
			- Repair
			- OS Tools
		- Additional items not in the default Toolbox:
			- OS Tools
				- Add Hardware Wizard
				- Authorization Manager
				- Calculator
				- Certificate Management (Current User)
				- Certificate Management (Local Machine) - Windows 8+
				- Character Map
				- Command Prompt
				- Component Services Management
				- Computer Management
				- Device Manager
				- DirectX Diagnostic
				- Disk Cleanup
				- Disk Defragmenter
				- Disk Management
				- DiskPart
				- Event Viewer
				- File Explorer
				- Group Policy
				- Local Security Policy
				- Local Users and Group Management
				- MSConfig
				- MSInfo32
				- Netsh Command Shell
				- Notepad
				- On-Screen Keyboard
				- Paint
				- Performance Monitor
				- Print Management
				- Problem Steps Recorder
				- RegEdit
				- Remote Desktop Connection
				- Resource Monitor
				- Services Manager
				- Settings (Modern)
				- Shared Folders Management
				- Snipping Tool
				- System Restore
				- Task Manager
				- Task Scheduler
				- Windows Explorer (Windows 7 Only)
				- Windows Memory Diagnostic
				- Windows PowerShell
				- Windows Store App Updates
				- Windows Troubleshooters
				- Windows Update
			- Control Panel
				- Action Center
				- Administrative Tools
				- AutoPlay
				- Backup and Restore
				- Biometric Devices
				- BitLocker Drive Encryption
				- Color Management
				- Control Panel
				- Credential Manager
				- Date and Time
				- Default Programs
				- Devices and Printers
				- Display Settings
				- DPI Settings
				- Ease of Access Center
				- File History
				- Folder Options
				- Fonts
				- HomeGroup
				- Indexing Options
				- Internet Options
				- Infrared
				- Keyboard
				- Mouse
				- Network and Sharing Center
				- Network Connections
				- Notification Area Icons
				- Pen and Touch
				- Personalization
				- Phone and Modem
				- Power Options
				- Program and Features
				- Recovery
				- RemoteApp and Desktop Connections
				- Sound
				- Speech Recognition
				- Storage Spaces
				- Sync Center
				- System
				- Tablet PC Settings
				- Taskbar and Navigation
				- Troubleshooting
				- User Accounts
				- Windows Defender
				- Windows Features
				- Windows Firewall
				- Windows Mobility Center
				- Windows To Go
				- Work Folders
			- Settings (Immersive Control Panel - Windows 8 and higher)
				- About
				- Accounts
				- Apps and Features
				- Date and Time
				- Devices
				- Device Encryption
				- Ease of Access
				- File History and Backup
				- Gaming
				- Language and Region
				- Network & Internet
				- Notification and Actions
				- Personalization
				- Power and Sleep
				- Printers and Scanners
				- Privacy
				- Search
				- Sound
				- Storage
				- Troubleshooters
				- Typing
				- Update, Security, and Recovery
			- Log Files
				- CBS Log File
				- DISM Log File
				- Pending File Rename Operations Log File
				- SetupAPI Device Log File
				- SetupAPI Application Log File
				- SetupAPI SysPrep Log File
				- Windows Setup Log File
				- Windows Update Log File
- Updated MyTools Editor (Toolbox > MyTools > MyTools Editor) with the following changes and improvments:
	- New UI/UX is used when adding and editing a MyTools item
	- Added Execution Type option to control how the Tooslet executes the tool being added/edited. The following options are available:
		- Normal - execute the item specified like a binary/executable file with administrator privileges.
		- Console - execute the item specified via an argument passed to the Windows Console (aka Command Prompt or cmd.exe). This is ideal for launching batch files (e.g. .bat, .cmd, etc.)
			- Note: The following syntax is used: cmd.exe /k "%PATH_TO_BINARY%" "%ARGUMENTS%"
		- Powershell - execute the item specified via an argument passed to Windows Powershell with common arguments and administrator privileges. This is ideal for launching Powershell scripts (e.g. .ps1, etc.)
			- Note: The following syntax is used: c:\windows\system32\WindowsPowerShell\v1.0\powershell.exe" -ExecutionPolicy -NoProfile -File "%PATH_TO_BINARY%" "%ARGUMENTS%"
		- MMC - execute the item specified as a Microsoft Management Console Snap-In
			- Note: The following syntax is used: c:\windows\system32\mmc.exe "%PATH_TO_BINARY%"
	- Added Architecture option to control when a tool will appear or execute based on OS architecture. The following options are avaialble: 
		- Any - Apepars and launches on both 64-Bit/x64 and 32-Bit/x86 versions of Windows
		- 64-Bit Only - Only appears and launches on 64-Bit/x64 versions of Windows
		- 32-Bit Only - Only appears and launches on 32-Bit/x86 versions of Windows
	- Added Alternate Icon option to specify a custom icon. By default, the icon included in the Path to Binary item is used for a MyTools item.
	- Added Search Tags option to allow one to customize how an item can be found using Search.
		- Note: This will also add extra weight for a MyTool to be a "Best Match". Adding duplicate tags increases the Best Match score/weight even more.
	- Added Tile Preview o show you what the MyTool item will look like in the UI and to allow you to test the item by clicking on it.
- Updated Inform to detect Processor/CPU Socket information from SMBIOS.
	- Note: Click the Details link under the Processor/CPU tile of the Hardware area of System to view this value.
- Updated Default Services Issue Scanner with the following new capabilities:
	- Support for devices running Windows 10 v1903 May 2019 Update (Build 18362.x - 19H1)
	- Improved detection and repair logic for Interactive Services
	- Improved detection and repair logic for Service Start State values
	- Improved detection and repair logic for Service Type values
	- Improved messaging and reporting of detected issues and repairs for Services
- Updated Disk Drive Issue Scanner's SMART Attributes capability with the following enhancements:
	- Improved support and bug fixes for internal and external HDDs and SSDs
	- Improved support and bug fixes for NVMe devices
	- Improved support and bug fixes for USB bridge/passthrough devices
- Updated the OS Tools area of the Toolbox to include the following additional items:
	- Control Panel (for Windows 8+ - Already existed on XP-7)
	- Group Policy
	- Programs and Features
	- System Restore

Bug Fixes:
	- Fixed a bug that caused Inform to stop populating information if an external display is connected and set in Duplicate Mode.
	- Fixed a bug that caused the Malwarebytes Issue Scanner to not perform the Incorrect Service Type Repair of the Default Services Issue Scanner.
	- Fixed a bug that caused the Malwarebytes Issue Scanner to not display some repair details in the Details Pane of Scan Results, Scan Report, and Repair Report.
	- Fixed a bug that caused the Malwarebytes Toolset UI to resize on high-DPI displays after opening a browse window in the Network Devices Scanner, MyTools, and Scan Settings.
	- Fixed a bug that caused the Network Devices Scanner to crash with a .NET error when exiting on a high-DPI display.
	- Fixed a bug that caused areas of the Toolset to not display the Notepad icon due to changes in Windows 10 v1903.
	- Fixed a bug that caused the Malwarebytes Portable Scanner and MBTS Update to attempt to process invalid manifest files when HFS metadata files are present in certain Toolset directories.
	- Fixed a bug that caused the MBTS Updater to hang and not populate if a HFS metada file is present in certain Toolset directories
	- Fixed a bug that caused the Malwarebytes Portable Scanner to claim it scanned successfully but actually crashed due to loading improper definition files.
	- Fixed a bug that caused the Malwarebytes Portable Scanner to hang while performing a scan due to being allowed to process unsupported scan options.
	- Fixed a bug that caused the Scan for Rootkits option to be selected for unsupported scan types (e.g. Hyper and Specific).
	- Fixed a bug that caused the MyTools Editor to auto-populate Properties for an existing MyTools entry and ignore saved values.
	- Fixed a bug that caused the MyTools Editor to not properly add an architecture value.
	- Fixed a bug that caused the Toolbox and MyTools to not respect the architecture value of a MyTools entry.




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.5.0.1276 Release Notes - 02/28/2019
----------------------------------------------------------------------

Changes/Improvements:
- Updated Inform component with the following changes:
	- Added Inform Actions feature with the following capabilities:
		- Refresh - This will force a re-scan of the device and update all applicable areas of Inform
		- Export to Clipboard
		- Export to Text File
	- Added Details view for the Programs tile in Inform (Inform > Applications > Programs and Features)
		- Clicking the link that states the number of installed Desktop programs will launch a Details window with the following information for each program:
			- Name
			- Publisher
			- Date (of install)
			- Platform (e.g. x86, x64, etc.)
	- Added Details view for the Windows Features tile in Inform (Inform > Applications > Programs and Features)
		- Clicking the link that states the number of installed Windows Features will launch a Details window with the following information for each feature:
			- Display Name (aka Friendly Package Name)
			- Feature Name (aka Package Name)
	- Added Details view for the Application Problems tile in Inform (Inform > Applications > Programs and Features)
		- Clicking the Details link will launch a Details window with the following information on each crash and/or hang (grouped by process name):
			- .EXE
			- Module
			- Time
			- Error
			- Message
	- Added Details view for the Blue Screens tile in Inform (Inform > History > Blue Screens)
		- Clicking the Details link will launch a Details window with the following information on each crash:
			- Date (of crash)
			- Bugcheck Code (AKA BSOD Error Code)
				-Note: See https://docs.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-code-reference2 for more details on specific Bugcheck Codes
			- Description (of BSOD/Bugcheck code)
			- File Path (to crash dump file)
	- Added Command Line Interface options to silently perform an Inform Export from MBTSLauncher.exe or MBTS.exe
		- /scan:inform /logfile:"PATH TO FILE" - Silently runs an Inform operation and outputs the results in plain text to the file specified.
		- If /LogFile is not specified, then the Inform Export text file is saved to %UserProfile%\Desktop\Inform_%COMPUTERNAME%_%DATE&TIME%.txt
		- If only a file name is specified for /LogFile (e.g. "Inform Log File.log"), then the specified file will be saved to %MBTS_ROOT% (aka the directory where MBTSLauncher.exe is stored).
	- Combined the Application Crashes and Application Hangs tiles in to a shared Application Problems tile
	- Updated the Operating System tile to report if Windows 10 Version 1809 (17763.253 or higher) is not installed on a Windows 10 device (Inform > System > Operating System)
- Added Quarantine Manager to the Malwarebytes Portable Scanner with the following features:
	- List, Restore, and Delete objects stored in the Quarantine of the Malwarebytes Portable Scanner on the local device
	- List, Restore, and Delete objects stored in the Quarantine of the an installed instance of Malwarebytes on the local device. The following products are supported:
		- Malwarebytes for Windows 3.6.1 and higher
		- Malwarebytes Endpoint Protection
		- Malwarebytes Breach Remediation 3.6.1 and higher
	- The Quarantine Manager is accessed by clicking Manage Quarantine in the settings drop down menu (gear icon) under the Malwarebytes Portable Scanner area of Scan
	- Note: Quarantined items are grouped by family name and time the group was quarantined.
- Updated Malwarebytes Breach Remediation for Windows (MBBR for Windows) in the following areas of the Malwarebytes Toolset:
	- Added Malwarebytes\MBBRv3\x64 - 64-bit version of Malwarebytes Breach Remediation v3.6.1.243 (mbbr.exe) and related files
		- Included with MBTS Full package (https://toolset.malwarebytes.com/file/mbts_full), downloaded on-demand via the Toolbox, or downloaded manually from MBTS Updater (Toolbox > MyTools > Check for Updates)
	- Added Malwarebytes\MBBRv3\x86 - 32-bit version of Malwarebytes Breach Remediation v3.6.1.243 (mbbr.exe) and related files
		- Included with MBTS Full package (https://toolset.malwarebytes.com/file/mbts_full), downloaded on-demand via the Toolbox, or downloaded manually from MBTS Updater (Toolbox > MyTools > Check for Updates)
	- Updated MBBR Command Prompt and MBBR CLI Scan (Toolbox > Remediate) to do the following:
		- On Windows 7 and higher: MBBR for Windows version 3.6.1.243 and higher is utilized
		- On Windows Vista and XP: MBBR for Windows Legacy version 2.7.2.1655 is utilized
	- Added MBBR for Windows Batch File (Malwarebytes\MBBRv3\mbbrv3.cmd) to help with CLI automation of MBBR for Windows (v3.6.1.243 and higher).
		- Includes support for the following optional parameters/switches:
			- /key YOUR-MBTS-KEY-HERE - Allows you to specify an MBTS or MBBR license key to use with the batch file
			- /auto - Performs a Threat Scan after automatically updating and registering the device. Requires use of the /key parameter.
		- Note: Windows 7 or higher is required for using MBBR for Windows (v3.x and higher)
	- Updated MBBR for Windows Legacy (v2.7.2.1655) component with the following changes:
		- Added support for the following optional parameters/switches to mbbr.cmd batch file:
			- /key YOUR-MBTS-KEY-HERE - Allows you to specify an MBTS or MBBR license key to use with the batch file
			- /auto - Performs a Threat Scan after automatically updating and registering the device. Requires use of the /key parameter.
		- Updated mbbr.cmd to provide better error handling
- Updated the Default Services Issue Scanner of the Malwarebytes Issue Scanner with the following features:
	- Added support to detect and repair the Print Spooler Service on all versions of Windows
	- Added support to detect and repair the Printer Extensions and Notifications Service (PrintNotify) on applicable versions of Windows
	- Added support to detect and repair the Interactive Services Detection Service (UI0Detect) on applicable versions of Windows
- Updated MBTS Updater (Toolbox > MyTools > Check for Updates) with the following changes:
	- Added MBBR for Windows (v3.x) package download and update support
		- Note: MBBR database definitions are not updated via the MBTS Updater.
	- Added MBBR for Windows Legacy (v2.x) package download and update support
		- Note: MBBR database definitions are not updated via the MBTS Updater.
	- Added logic to improve download performance of updates
	- Added support to include a small reason/note for an update where the major version doesn't change
	- Added logic to utilize LastUpdate.json to support improved component package updating experience, performance, and stability
	- Added logic to cleanup temporary package files used during the component update process


Bug Fixes:
	- Fixed a bug that caused SMART Attribute Error 197 (Current Pending Sector Count) to use the description content of SMART Attribute Error 187 (Reported Uncorrectable Errors)
	- Fixed a bug that caused Inform to not display the Windows Defender icon on Windows 10
	- Fixed a bug that caused Inform to display "Samsung" on Silicon Power (SPCC) based disk drives (reported by Andrew Marcelli of Ohio TechWorks)
	- Fixed a bug that caused MBBR CLI Scan and MBBR Command Prompt to fail when certain characters are present in the path of mbbr.exe (reported by Carlos Mack)
	- Fixed a bug that caused the Default Services Issue Scanner not to detect issues with the Print Spooler Service (reported by Sean McCormack of Magnify247.com)
	- Fixed a bug that caused the final download speed of an update to report as 0 KB
	- Fixed several bugs that caused the MBTS Updater to fail to download or update several components of the Malwarebytes Toolset.
	- Fixed a bug that could prevent the Malwarebytes Toolset from updating itself.
	- Fixed a bug that could allow an extra instance of MBTS.exe to launch if CLI options are used.
	- Fixed a bug that could cause Inform Export and launching Toolbox items from CLI to fail if the system was offline.


	

----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.4.1.1229 Release Notes - 11/05/2018
----------------------------------------------------------------------

Changes/Improvements:
- Added Fab's Autoback Pro 7 (Trial) to the Malwarebytes Toolset:
	- This utility is designed to help streamline the backup, transfer, and migration of user data and settings on a Windows PC. More details on this product can be found here: https://www.fpnet.fr/
		- This is an exclusive partnership to expand the capabilities of the Malwarebytes Toolset by providing quick access to the leading data backup and transfer tool used by technicians around the world
	- Includes free trial if you do not have a license and an exclusive 25% discount on purchasing a full license (launch Fab's AutoBackup 7 Pro from Toolbox > Repair for the discount code)
	- If you have an existing license, enter your details on first launch.
	- Fab's Autoback Pro 7 is found in the following locations:
		- Toolbox > Repair > Fab's AutoBackup 7 Pro
		- Malwarebytes\AutoBackup7Pro\AutoBackup7Pro.exe (after downloading via Toolbox > Check for Updates)
- Added support for network location and read-only execution of the Malwarebytes Toolset via the following changes:
	- Updated MBTSLauncher.exe and MBTS.exe to detect execution from a network location (e.g. mapped network drive or UNC path) or read-only location (e.g. CD/DVD, ISO, read-only UFD, etc.) and perform the following:
		- If network location/read-only execution is detected, the Malwarebytes Toolset will copy to %LocalAppData%\Temp\%MBTS_VERSION% and relaunch from the new location
		- If an existing instance of the Toolset exists at %LocalAppData%\Temp\%MBTS_VERSION%, only new files will be copied (incremental copy) and then relaunch the Malwarebytes Toolset from the new location
		- All Command Line Arguments are passed on to the new instance of the Malwarebytes Toolset
	- If storing on a network location, you must use the host Windows PC to keep the shared instance of the Malwarebytes Toolset up to date.
- Updated Inform component with the following changes:
	- Added support to detect multiple GPUs/Display Adapters and provide the following details:
		- Slot/Connection type (e.g. integrated, PCIe, etc.)
		- Integrated VRAM amount
		- System RAM amount (Shared and/or Dedicate)
		- Driver Version
		- Driver Date
		- List of displays/monitors connected to that particular GPU/display adapter
	- Added support to detect displays/monitors connected to a GPU/Display Adapter and provide the following details:
		- Brand and Model
		- Connection type (e.g. DisplayPort, HDMI, DVI, Internal, VGA, etc.)
		- Resolution
			- With quick link to access Display Settings
		- DPI and Scaling Percentage
			- With quick link to access Scaling Settings
		- Diagonal Display Size
		- Refresh Rate
		- Rotation
		- Manufactured date (Month and Year)
	- Added support to detect designed battery capacity information from SMBIOS to provide more accurate battery health results
- Updated Malwarebytes Anti-Bundleware Scanner Beta to v0.9.5
- Updated MBTS Updater (Toolbox > Check for Updates) with the following changes:
	- Added support to download, and update Fab's Autobackup 7 Pro

Bug Fixes:
	- Fixed a bug that caused a 0x50 or 0x19 BSOD when running the Malwarebytes Toolset from a network location (e.g. mapped network drive, UNC path, etc.)




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.4.0.1208 Release Notes - 10/08/2018
----------------------------------------------------------------------

Changes/Improvements:
- Updated portable malware scanner to Malwarebytes Portable Scanner with the following features:
	- Malwarebytes v3.6.1 scanning technology
	- 2x faster malware scans
	- Optional access to our anomalous threat detection technology (internet access required)
	- Improved removal, repair, and remediation technology
	- Post-reboot removal and summary reporting experience
	- Native x86 and x64 architecture
- Added Command Line Interface options with the following capabilities:
	- /password:"Your Startup Password" - Suppress prompt for your Startup Password.
	- /scan:malware - Scans for malware with the Malwarebytes Portable Scanner using the current Default Scan settings.
	- /scan:issues - Scans for issues with the Malwarebytes Issue Scanner.
	- /repair:network - Performs a Network Reset
	- /repair:wmi - Performs a WMI Rest
	- /toolbox:"Name of Tool" - Launches the specified tool in quotes from the Toolbox or MyTools.
	- /LogLevel:<0-5> - Launches the Malwarebytes Toolset with a specified logging level output for the "DebugLogging.txt" file. The default log level is 1 (Errors Only) and is used if no LogLevel is specified. The following is a definition of each log level:
		- 0 - No events are logged
		- 1 - Events marked as Errors only are logged
		- 2 - Events marked as Errors and Warnings are logged
		- 3 - Events marked as Errors, Warnings, and Info are logged
		- 4 - Events marked as Errors, Warnings, Info, and Debug are logged
		- 5 - Events marked as Errors, Warnings, Info, Debug, and Trace are logged
- Added Startup Password functionality to limit unauthorized access to the Malwarebytes Toolset.
	- Managed in Settings (e.g Create Password, Change, Remove, etc.)
	- Minimum of four characters.
	- Prompt to enter Startup Password occurs at launch of the Malwarebytes Toolset.
		- Note: You can suppress the prompt by passing the following argument with your Startup Password to MBTSLauncher.exe or MBTS.exe: /password:"Your Startup Password"
		- Note: Prompt for Startup Password will not occur when post-reboot remediation is required by Malwarebytes Portable Scanner.
- Increased offline usage and license re-verification of the Malwarebytes Toolset to 15 days
- Increased offline usage, license re-verification, and definition database lifespan of Malwarebytes Breach Remediation to 15 days
- Re-designed Malwarebytes Toolset file and folder structure to support native x64 and x86 execution. Details included below.
	- Malwarebytes\MBTS - 32-Bit (x86) version of Malwarebytes Toolset and Malwarebytes Portable Scanner files.
	- Malwarebytes\MBTS\x64 - 64-Bit (x64) version of Malwarebytes Toolset and Malwarebytes Portable Scanner files.
	- Malwarebytes\MBTS\Data\Configuration - Shared configuration files for the Malwarebytes Toolset and Malwarebytes Portable Scanner
	- Malwarebytes\MBTS\Data\Defs - Definition database files for the Malwarebytes Portable Scanner
- Merged legacy MBTSCommandLine.exe executable functionality (WMI Reset and Network Reset) in to MBTS library files and removed the standalone file.
- Updated Malwarebytes Breach Remediation CLI to version 2.7.2.1655 and the following related changes:
	- Added Malwarebytes Breach Remediation Batch file (Malwarebytes\MBBRv2\mbbr.cmd) to help with automation of MBBR from the Toolbox
	- Added MBBR Command Prompt to the Remediate section of the Toolbox.
	- Moved Malwarebytes\MBTS\mbbr.exe to Malwarebytes\MBBRv2\mbbr.exe. Please update your MBBR scripts to reflect this change.
	- Replaced Command-Line Malware Scan in Toolbox > Remediate with MBBR CLI Scan
	- Removed Command-Line Rootkit Scan. Use Anti-Rootkit or MBBR Command Prompt to run a CLI rootkit scan.
- Updated Malwarebytes Issue Scanner's OS Profile database to support Windows 10 Version 1809 (Build 17763.x - October 2018 Update - RS5)
	- Services Issue Scanner
	- Safe Mode Services Issue Scanner
	- File Associations Issue Scanner
	- Default Registry Values Issue Scanner (Critical OS Components)
	- Winsock Issue Scanner
- Updated MBTSLauncher.exe to pass CLI arguments to MBTS.exe and to automatically detect the proper architecture version of MBTS.exe to launch
- Updated Scan component with the following changes:
	- Added post-reboot support to relaunch Malwarebytes Toolset for malware scan operations that require a reboot
	- Replaced Malwarebytes Breach Remediation UI elements with Malwarebytes Portable Scanner UI elements
	- Renamed "Run Manual Update" to "Update Definitions" under the settings drop-down menu for the Malwarebytes Portable Scanner
	- Changed "Update Definitions" to use MBTS Updater framework to download definition updates
- Updated MBTS Updater (Toolbox > Check for Updates) with the following changes:
	- Added support for 32-bit and 64-bit Malwarebytes Portable Scanner definition files
	- Removed support to download Malwarebytes Breach Remediation definition files. Utilize the built-in CLI functionality of MBBR.exe instead.
- Windows XP and Windows Vista support is untested and not officially supported.
	- Use Malwarebytes Toolset v1.3.1.1119, Malwarebytes Breach Remediation v2.7.2, or Malwarebytes for Windows (Legacy) v3.5.1 on these operating systems

Bug Fixes:
	- Fixed a bug that caused MBTS Updater to not properly use TLS 1.2 in certain situations
	- Fixed a bug that caused MBTS UI elements to render incorrectly in certain high DPI scenarios (Reported by Crista Switzer of abcdTECH)
	- Fixed a bug that caused Malwarebytes Breach Remediation CLI to BSOD when scanning on some systems running Malwarebytes 3.x
	- Fixed a bug that caused WMI Reset to produce benign errors on Windows 8 and higher
	- Fixed a bug that caused WMI Reset to incorrectly process MOF files that contained "uninstall" in their filename
	- Fixed a bug that caused DiskPart to show the wrong icon under OS Tools in the Toolbox
	- Fixed a bug that allowed too many attempts to retry the Startup Password
	- Fixed a bug that caused Release Notes not to launch from Settings or auto-launch after performing an automatic upgrade
	- Fixed a bug that caused leftover legacy files from 1.3.x to remain after an automatic upgrade
	- Fixed a bug that caused Malwarebytes Anti-Rootkit to fail to launch from the Toolbox with a 0x2 File Not Found error (Reported by Dale Baker of Computer Physician) 
	- Fixed a bug that allowed Inform to load a white screen in certain scenarios (Reported by CJ Collins from onPhyia)
	- Fixed a bug that allowed Malwarebytes Portable Scanner to attempt scanning with missing or invalid definition database files

	


----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.3.1.1119 Release Notes - 06/28/2018
----------------------------------------------------------------------

Changes/Improvements:
- Updated the Protect section of the Toolbox with the following changes:
	- Added Malwarebytes for Chrome
		- Note: This will launch a web browser to download the Malwarebytes for Chrome extension. More details: https://forums.malwarebytes.com/topic/218616-malwarebytes-for-chrome-beta/
	- Added Malwarebytes for Firefox
		- Note: This will launch a web browser to download the Malwarebytes for Firefox extension. More details: https://forums.malwarebytes.com/topic/218646-malwarebytes-for-firefox-beta/
	- Added Malwarebytes for Windows (Legacy)
			- Note: This version of Malwarebytes is for Windows XP and Vista Only. It will only display on those operating systems.
			- Note: The installer is stored at Malwarebytes\MB3\Legacy\mb3-setup-legacywos-X.exe
	- Added Malwarebytes Support Tool
		- Note: This utility replaces MB-Clean and MB-Check
		- Note: The utility is stored at Malwarebytes\Support Tool\mb-support-x.exe
	- Renamed "Install Malwarebytes 3" to Malwarebytes for Windows
			- Note: This version of Malwarebytes is for Windows 7 and higher only. It will only display on those operating systems.
			- Note: The installer is stored at Malwarebytes\MB3\mb3-setup-mbts-x.exe
	- Removed JRT End of Life Information from the Remediate section of the Toolbox
		- Note: JRT functionality is included with AdwCleaner
	- Removed MB-Clean and MB-Check
		-Note: These utilities are replaced by the Malwarebytes Support Tool.
- Updated the MBTS Updater to support acquiring and updating the Malwarebytes Support Tool and Malwarebytes for Windows (Legacy)
- Updated Issue Scanner logic for the Default Start State of the OpenSSH Authentication Agent Service (ssh-agent) on Windows 10 v1803 due to Microsoft changing the default start state with the latest Cumulative Update.

Bug Fixes:
	- Fixed a bug that caused CMD icons to display for Settings and Windows Store App Updates under Toolbox > OS Tools on Windows 8 and higher
	- Fixed a bug that caused the Issue Scanner to improperly detect and repair the Default Start State of the OpenSSH Authentication Agent Service (ssh-agent) on Windows 10 v1803 after the latest Cumulative Update is installed.



	
----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.3.0.1117 Release Notes - 05/07/2018
----------------------------------------------------------------------

Changes/Improvements:
- Added MBTS Settings Framework which provides the following new features:
	-Settings component with the following initial capabilities
		- Select the Toolset screen to load at launch (e.g. Inform, Scan, Toolbox, or Settings)
		- Help improve the Toolset by providing usage statistics: Always or Never
		- Manage your License Key and view License Details (e.g. License Key, License Type, and Expiration Date)
			-Note: To change your license key, simply click the key and follow the prompts.
		- View version information, release notes, user guide, EULA, and privacy policy
	-Unified settings file (Malwarebytes\MBTS\Data\Configuration\mbts-settings.json) to allow future capabilities and easy transferring to other instances of MBTS.
		Note: Custom Scan settings for Malware Scan are automatically imported in to this new unified settings file.
		Note: mbts-settings.json file is human-readable to allow offline/manual editing and transferring to other MBTS instances.
- Updated the following Issue Scanners to support Windows 10 Version 1803 (Build 17134.x - April 2018 Update - RS4)
	- Services Issue Scanner
	- Safe Mode Services Issue Scanner
	- File Associations Issue Scanner
	- Default Registry Values Issue Scanner (Critical OS Components)
	- Winsock Issue Scanner
- Updated Inform to report if Windows 10 Version 1803 (17134.x) is not installed on a Windows 10 device
- Updated Malwarebytes Breach Remediation (MBBR) to v2.7.2.1654 to resolve 7-Zip vulnerability CVE-2018-10115 in the following components:
	- Malwarebytes Breach Remediation GUI (Scan > Scan for Malware)
	- Malwarebytes Breach Remediation CLI (Malwarebytes\MBTS\MBBR.exe and Toolbox > Remediate)
- Updated MBTS shared 7zip library to version 18.05 to resolve 7-Zip vulnerability CVE-2018-10115
- Updated MBTS Update Framework to immediately download and perform an in-place update/upgrade of the Malwarebytes Toolset when Update Now is selected from the Update Notification Banner
- Updated Process Termination message box to include improved messaging and an option to remember your choice (saved as part of Default Scan setting) on Windows Vista and higher

Bug Fixes:
	- Fixed a bug that caused Network Devices Scanner to detect a Ring Device as a Nest Thermostat/Camera with the wrong icon and name
	- Fixed a bug that caused unneeded device types to appear in the list drop-down when editing the Device Type in the Network Devices Scanner

	
	

----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.2.2.1113 Release Notes - 04/10/2018
----------------------------------------------------------------------

Changes/Improvements:
- Updated the following Issue Scanners to support Windows 10 Version 1803 (Build 17133.x - Spring Creators Update - RS4)
	- Services Issue Scanner
	- Safe Mode Services Issue Scanner
	- File Associations Issue Scanner
	- Default Registry Values Issue Scanner (Critical OS Components)
	- Winsock Issue Scanner
- Updated Inform to report if the latest Windows 10 16299 Cumulative Update is not installed

Bug Fixes:
	- Fixed a bug that caused Inform to state the current UBR of the Windows 10 build number rather than the updated UBR	
	
	
	
	
----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.2.1.1110 Release Notes - 02/28/2018
----------------------------------------------------------------------
Changes/Improvements:
- Updated Disk Drive Issue Scanner SMART Attributes capability with the following enhancements:
	- NVMe support on Windows 10
	- Additional support and bug fixes for several internal and external HDDs
	- Additional support and bug fixes for several internal and external SSDs
	- Additional support and bug fixes for several USB bridge/passthrough devices

Bug Fixes:
	- Fixed a bug that caused MBTS Updater to hang when downloading an updated Malwarebytes 3 Installer
	- Fixed additional bugs reported on the forums, directly from Techbench members, and from internal testing/development


	

----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.2.1.1108 Release Notes - 02/27/2018
----------------------------------------------------------------------
Changes/Improvements:
- Updated Malwarebytes Breach Remediation (MBBR) to v2.7.2.1653 to resolve 7zip vulnerabilities CVE-2018-5996 and CVE-2017-17969 in the following components:
	- Malwarebytes Breach Remediation GUI (Scan > Scan for Malware)
	- Malwarebytes Breach Remediation CLI (Malwarebytes\MBTS\MBBR.exe and Toolbox > Remediate)
- Updated MBTS shared 7zip library to version 18.01 to resolve 7zip vulnerabilities CVE-2018-5996 and CVE-2017-17969
- Updated MBTS Updater (Toolbox > MyTools > Check for Updates) with the following enhancements:
	- Added ability to update Malwarebytes Rules/Database for MBBR (GUI and CLI)
	- Added ability to update Malwarebytes Anti-Bundleware package (does not currently update MBAB database)
	- Added ability to update Malwarebytes Breach Remediation for Mac package (stored in Malwarebytes\MBBR For Mac\)
	- Improved update logic and version clarity for Malwarebytes 3 Installer
- Reduced size of MBTS Minimum Download (https://toolset.malwarebytes.com/file/MBTS/YOUR-MBTS-PRODUCT-KEY) by 25MB by removing Malwarebytes Anti-Bundleware as an included component (obtainable via MBTS Updater functionality)
- Reduced size of MBTS Update Package by 25MB by removing Malwarebytes Anti-Bundleware as an included component (obtainable via MBTS Updater functionality)

	

	
----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.2.0.1097 Release Notes - 01/10/2018
----------------------------------------------------------------------

Changes/Improvements:
- Added Network Devices scanner to the Network section of Inform which adds the following functionality:
	- Scan, discover, and intelligently identify local network devices via the following methods:
		- ICMP/PING
		- ARP Cache
		- DNS Resolution
		- Universal Plug and Play (UPnP)
		- Simple Service Discovery Protocol (SSDP)
		- Web Services on Devices (WSD)
		- Windows Connect Now (WCN)
		- Selected Port/Service scanning
	- Discovered devices are grouped in to the following categories and can be sorted as needed by clicking an applicable column header:
		- Gateway ? the network device, usually a router or access point, that is serving you network and internet access.
		- Local Device ? the device you are currently running the Network Devices scanner from
		- Network Devices ? List of network devices connected to the same network as the Local Device
	- Open the configuration web gui of supported network devices (e.g. router, access point, network printer, etc) via a Configure button
		- Note: the device must advertise a SSDP/UPnP/WCN/WSD Presentation URL
	- Right-click context menu with the following functionality:
		- Copy to clipboard
		- Open in default web browser (for URL based content)
		- Search the internet for...
		- Edit for Device Name, Manufacturer, MAC Address, and Device Type cells (main window only)
	- Export discovered network devices to the following formats:
		- Windows Clipboard
		- Text file
		- CSV file (basic details only)
- Updated Inform to more accurately report Windows Update status on PCs recently upgraded to a new Windows 10 build
- Updated Malwarebytes Anti-Bundleware Scanner Beta to version 0.9.4
	- Fixes license expiration error bug
	
Bug Fixes:
- Fixed a bug that caused Scan Results to appear hung and prevent buttons from rendering
- Fixed a bug that caused Scan Reports information to appear hidden due to misplacement of a window separator
- Fixed additional bugs reported on the forums, directly from Techbench members, and from internal testing/development




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.1.5.1089 Release Notes - 10/26/2017
----------------------------------------------------------------------

Changes/Improvements:
- Added Malwarebytes Anti-Bundleware Scanner Beta to the following areas of the Toolset:
	- The Toolbox under the Remediate section
	- The directory Malwarebytes\MBAB
- Added the following PDF user guides to Malwarebytes\User Guides folder:
	- Malwarebytes Toolset User Guide
	- Malwarebytes Breach Remediation User Guide (Windows)
	- Malwarebytes User Guide (Windows)
- Updated MBTS Updater to support updating and obtaining user guides 
- Removed Junkware Removal Tool (JRT) due to the following reasons:
	- AdwCleaner v7 and higher includes JRT functionality
	- Product has entered end of maintenance and will soon enter end of life
		- Note: See the following for more details: https://forums.malwarebytes.com/topic/213402-junkware-removal-tool-to-be-discontinued/


		
		
----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.1.4.1088 Release Notes - 10/16/2017
----------------------------------------------------------------------

Bug Fixes:
- Fixed a bug that prevented MBTS from opening on certain 64-Bit systems


----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.1.3.1087 Release Notes - 10/12/2017
----------------------------------------------------------------------

Changes/Improvements:
- Updated the OS profile database for the following Issue Scanners to support Windows 10 Fall Creator?s Update (Version 1709 Build 16299.15)
	- Services Issue Scanner
	- Safe Mode Services Issue Scanner
	- File Associations Issue Scanner
	- Default Registry Values Issue Scanner (Critical OS Components)
	- Winsock Issue Scanner
- Updated the BITS Download Test component of the Network Issue Scanner to support API changes in Windows 10 Fall Creator?s Update (Version 1709 Build 16299.15)
- Updated MBTS 64-Bit Helper Application (MBTS64.exe) to provide detailed error messaging if it fails
- Updated MBTS UI to improve readability of list views when Windows is using High Contrast Mode 

Bug Fixes:
- Fixed a bug that would cause the Group Policy Issue Scanner to fail at repairing identified issues
- Fixed a bug that would cause the Group Policy Issue Scanner to display a registry path with double root keys in repair reports and logs
- Fixed several bugs reported on the forums, directly from Techbench members, and from internal testing/development




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.1.2.1085 Release Notes - 09/27/2017
----------------------------------------------------------------------

Changes/Improvements:
- Added the following "Jump To" to the right-click context menu of content in the Malware Scan and Issue Scanner Properties Pane:
	- Jump to Regedit - Opens RegEdit with focus on the registry path of the selected registry object
	- Jump to Explorer - Opens Windows Explorer/File Explorer with focus on the file, directory, or parent directory of the selected file/folder object
	- Jump to Command Prompt - Opens an Administrator Level Command Prompt console with focus on the directory or parent directory of the selected file/folder object
- Added ReleaseNotes.txt to the MBTS package in the Malwarebytes\MBTS folder
- Updated Issue Scanner with the following improvements/features:
	- Allow limited scanning on un-profiled operating systems (e.g. Windows Insider Preview, Windows Server, etc.)
		- Issue Scanners that rely on OS Profile Data will be skipped/not ran
	- Allow limited scanning on systems without .NET 4.x
		- Issue Scanners that rely on .NET 4.x will be skipped/not ran
	- Auto-Select first item in an Event Viewer based Issue Scanner result
- Updated MBTS Updater to include an extraction and progress dialog when updating to a new version of MBTS
- Updated MBTS UI and error messaging for areas of the Toolset that require .NET 4x
- Updated several under-the-hood components for future functionality

Bug Fixes:
- Fixed an Inform UI sizing bug that may have occurred on first open at low resolutions
- Fixed several bugs reported on the forums, directly from Techbench members, and from internal testing/development




----------------------------------------------------------------------
Malwarebytes Toolset (MBTS) 1.1.0.1080 Release Notes - 08/31/2017
----------------------------------------------------------------------

Changes/Improvements:
- Added Scan History framework to the Scan component which provides the following features:
	- View and Delete previous Scan and/or Repair Reports of the Malware Scanner or Issue Scanner
		- Scan History logs are encrypted and stored on the client's PC in c:\ProgramData\Malwarebytes\Malwarebytes Toolset\Logs (Vista-10) or c:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes Toolset\Logs (XP only)
		- Quickly View/Open a selected Scan History entry in the list by Double Clicking it or pressing the Enter key
		- Quickly Delete a selected Scan History entry by pressing the Delete key
	- Export a summary of the currently loaded scan history report to a text file or the clipboard
		- Also includes basic system and OS information from Inform
	- Export a summary of the current scan and/or repair results to a text file or the clipboard
		- Also includes basic system and OS information from Inform
- Added MBTS Updater framework which provides the following features:
	- Automated in-place update/upgrade capability with notification bar of the Malwarebytes Toolset
	- Toolset Updater UI to perform, monitor, and control the update, download, and upgrade processes
	- Dynamic updating and/or downloading with special notification icons for standalone Malwarebytes products in the Toolbox
	- Standalone Toolset Updater in the Toolbox so you can manually check for updates
- Added the following Malwarebytes Support Tools to the Toolbox (Protect):
	- MB-Clean - Utility that automatically force uninstalls Malwarebytes products, performs manual clean-up, saves the product key, and initiates a self-installation if requested. This is commonly used to do a clean reinstall of the latest version of Malwarebytes where the existing installation was damaged or corrupted.
	- MB-Check - Utility to gather and export detailed log files of currently installed Malwarebytes products. This is commonly used to help with troubleshooting Malwarebytes products.
- Updated Toolbox to provide the following capabilities:
	- Display a download icon when a standalone product is not detected in the MBTS file structure (e.g. AdwCleaner, JRT, MBAR, MB3 installer, etc)
	- Display an update icon when an update is available for a standalone product (e.g. AdwCleaner, JRT, MBAR, MB3 installer, etc)
- Update Default Services Issue Scanner to prevent checking of the Computer Browser Service (browser) on Windows 8.1 or 10 systems that have disabled the SMB 1.0/ CIFS File Sharing Support feature/component of Windows
	- Note: disabling SMB 1.0/ CIFS File Sharing Support feature is a common security recommendation by Microsoft to reduce security risks. This feature will be completely removed in the Windows 10 Fall Creators Update
- Updated AdwCleaner to version 7.0.2.1
- Updated Junkware Removal Tool to version 8.1.4
- Updated Malwarebytes 3 installer to version 3.2.2.2018
- Updated keyboard navigation to allow you to Exit/Close a pop-up module by pressing ESC

Bug Fixes:
- Fixed a bug that caused the MBTS Updater framework to enter a download/update loop if MBTS structure had been placed in root
- Fixed a bug that may cause background apps or windows to take focus over MBTS.exe
- Fixed a bug that caused file explorer dialog box issues on Windows Vista
- Fixed a bug in MyTools when special characters existed in a path
- Fixed a bug in MyTools to properly handle quotes used in commands
- Fixed several keyboard navigation bugs
- Fixed several bugs reported on the forums, directly from Techbench members, and from internal testing/development




----------------------------------------------------------------------
Malwarebytes Toolset v1.0.0.1076 Release Notes - 08/28/2017
----------------------------------------------------------------------

Changes/Improvements:
- Added Scan History framework to the Scan component which provides the following features:
	- View and Delete previous Scan and/or Repair Reports of the Malware Scanner or Issue Scanner
		- Scan History logs are encrypted and stored on the client's PC in c:\ProgramData\Malwarebytes\Malwarebytes Toolset\Logs (Vista-10) or c:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes Toolset\Logs (XP only)
		- Quickly View/Open a selected Scan History entry in the list by Double Clicking it or pressing the Enter key
		- Quickly Delete a selected Scan History entry by pressing the Delete key
	- Export a summary of the currently loaded scan history report to a text file or the clipboard
		- Also includes basic system and OS information from Inform
	- Export a summary of the current scan and/or repair results to a text file or the clipboard
		- Also includes basic system and OS information from Inform
- Added MBTS Updater framework which provides the following features:
	- Automated in-place update/upgrade capability with notification bar of the Malwarebytes Toolset
	- Toolset Updater UI to perform, monitor, and control the update, download, and upgrade processes
	- Dynamic updating and/or downloading with special notification icons for standalone Malwarebytes products in the Toolbox
	- Standalone Toolset Updater in the Toolbox so you can manually check for updates
- Added the following Malwarebytes Support Tools to the Toolbox (Protect):
	- MB-Clean - Utility that automatically force uninstalls Malwarebytes products, performs manual clean-up, saves the product key, and initiates a self-installation if requested. This is commonly used to do a clean reinstall of the latest version of Malwarebytes where the existing installation was damaged or corrupted. More details are here.
	- MB-Check - Utility to gather and export detailed log files of currently installed Malwarebytes products. This is commonly used to help with troubleshooting Malwarebytes products. More details are here.
- Updated Toolbox to provide the following capabilities:
	- Display a download icon when a standalone product is not detected in the MBTS file structure (e.g. AdwCleaner, JRT, MBAR, MB3 installer, etc)
	- Display an update icon when an update is available for a standalone product (e.g. AdwCleaner, JRT, MBAR, MB3 installer, etc)
- Update Default Services Issue Scanner to prevent checking of the Computer Browser Service (browser) on Windows 8.1 or 10 systems that have disabled the SMB 1.0/ CIFS File Sharing Support feature/component of Windows
	- Note: disabling SMB 1.0/ CIFS File Sharing Support feature is a common security recommendation by Microsoft to reduce security risks. This feature will be completely removed in the Windows 10 Fall Creators Update
- Updated AdwCleaner to version 7.0.1.0
- Updated Junkware Removal Tool to version 8.1.4
- Updated Malwarebytes 3 installer to version 3.2.2.2018
- Updated keyboard navigation to allow you to Exit/Close a pop-up module by pressing ESC
- Fixed a bug in MyTools when special characters existed in a path
- Fixed a bug in MyTools to properly handle quotes used in commands
- Fixed several bugs reported on the forums, directly from Techbench members, and from internal testing/development




----------------------------------------------------------------------
Malwarebytes Toolset v1.0.0.1059 Release Notes - 06/28/2017
----------------------------------------------------------------------

Changes/Improvements:

- Updated the Disk Drive Issue Scanner in the Malwarebytes Issue Scanner to support identifying issues of the following SMART Attributes:
	- 5 - Reallcoated Sector Count - A total count of sectors marked as ?reallocated? or remapped. This marking occurs when a read/write/verification error is encountered and the data is remapped to a special reserved/spare area of the disk. This is may indicate impending drive failure. Back up data and run additional drive diagnostics immediately. Hardware replacement may be required.
	- 187 - Reported Uncorrectable Errors - A total count of errors that could not be corrected or recovered using hardware Error Correcting Code (ECC). This is may indicate impending drive failure. Back up data and run additional drive diagnostics immediately. Hardware replacement may be required.
	- 196 - Reallocation Event Count - A total count of ?reallocated? or remapped sector operations performed (successful and unsuccessful). If this value exceeds the Reallocated Sector Count (Error 5) that may indicate sector reallocation/remapping failures.
	- 197 - Current Pending Sector Count - A total count of sectors waiting to be remapped due to a read/write/verification error. This is may indicate impending drive failure. Back up data and run additional drive diagnostics immediately. Hardware replacement may be required.
	- 198 - Uncorrectable Sector Count - A total count of uncorrectable errors when reading/writing a sector.
	- SMART Error Log (Historical Data - Device Lifetime) - A count of all SMART Errors stored in the SMART Error Log and the length of time these errors occurred over. The time is based on device power-on time, not calendar time due to the technical limitations of SMART. While this does not provide specific error information, it can be used as a qualitative historical indicator of drive health.
	- SMART Error Log (Most Recent Errors) - A detailed list of the most recent SMART Errors stored in the SMART Error Log and the time they occurred. The time is based on device power-on time, not calendar time due to the technical limitations of SMART. Selecting one of these errors in the Details pane will display the full error details that are stored in the SMART Error Log. Due to technical limitations of SMART, only a limited number of detailed errors are stored in the SMART Error Log.
- Updated Inform with a refresh/reload capability by pressing F5
- Updated Inform (System) to detect the following additional system hardware related items:
	- Firmware Embedded Product Key
	- System Model
	- System Serial Number
	- System SKU
- Updated Inform (Security) to more accurately reflect security software and Windows Defender status on Windows 8+
- Updated Toolbox (Repair) to provide the ability to launch the Settings app on Windows 8+
- Updated Toolbox (Repair) to provide the ability to launch Windows Store App Updates on Windows 8+
- Updated Toolbox (Repair) to provide the ability to launch Windows Troubleshooters on Windows 7+
- Updated Toolbox (Repair) to accurately display File Explorer on Windows 8+ and Windows Explorer on Windows XP, Vista, and 7
- Updated Malwarebytes 3 installer to version 3.1.2.1733-1.0.141-1.0.2092
- Fixed several bugs reported on the forums, directly from Techbench members, and from internal testing/development




----------------------------------------------------------------------
Malwarebytes Toolset v1.0.0.1053 Release Notes - 06/02/2017
----------------------------------------------------------------------
Changes/Improvements:
- Updated Toolbox functionality to allow users to manually update AdwCleaner and Malwarebytes 3 without needing to rename them
	- AdwCleaner updates must be placed in the Malwarebytes\AdwCleaner folder with a name syntax of adwcleaner_*.exe (e.g. adwcleaner_6.047.exe)
	- Malwarebytes 3 updates must be placed in the Malwarebytes\MB3 folder with a name syntax of mb3-setup*.exe (e.g. mb3-setup-mbts-3.1.2.1733-1.0.139-1.0.2060, mb3-setup-consumer-3.1.2.1733-1.0.139-1.0.2060, etc.)
- Updated AdwCleaner to version 6.047
- Updated Malwarebytes 3.0 installer to version 3.1.2.1733-1.0.139-1.0.2060 (Refreshed on 06/02/2017)




----------------------------------------------------------------------
Malwarebytes Toolset v1.0.0.1051 Release Notes  - 04/24/2017
----------------------------------------------------------------------

Changes/Improvements:
- Updated Malwarebytes Issue Scanner to support Windows 10 Creator?s Update (Version 1703 Build 15063.x)
- Updated Malwarebytes Issue Scanner with new Issue Scanners for the following areas:
	- Disk Drive Issue Scanner that detects and reports on the following:
		- SMART Status Errors
		- Dirty Bit Set
		- Low Free Space
		- NTFS and Disk errors in Event Log (This Boot, Last 30 Days, and Last 60 Days)
		- Windows Failure Prediction Status
	- Default Registry Values Issue Scanner that provides validation and restoration of the following critical Windows OS components:
		- Winlogon - UserInit
		- Winlogon - Shell (x86)
		- Winlogon - Shell (x64)
		- SafeBoot - AlternateShell
		- Session Manager - BootExecute
		- Session Manager - BootShell
		- SubSystems - Kmode
		- SubSystems - Windows
	- Event Log Issue Scanner that detects and reports on the following:
		- Windows Hardware Error Architecture (WHEA)
		- Default Services - Errors This Boot
		- Installed Services - Errors This Boot
		- Windows Update - Last Update Search (Last 60 Days)
		- Windows Update - Installation Errors (Last 30 Days)
- Updated Device Manager Issue Scanner to include Performance Degradation identification for Hardware/Devices
- Updated Services Issue Scanner with Safe Mode Services validation and restoration capabilities
- Updated Results and Reports sidebar UI elements to support detailed information produced by the Event Log and Default Registry Values Issue Scanners
- Updated Repair section of the Toolbox with Boot to Windows RE to provide the ability to load the Windows Recovery Environment on next boot (Windows 7+ only)
- Updated Toolbox functionality to prevent AdwCleaner link from becoming broken if AdwCleaner auto-updates
- Updated Infrom to launch the HOSTS file in an Admin instance of Notepad to allow editing
- Updated MyTools Editor with a right-click context menu Edit Batch File item to allow quick batch file editing via Notepad
- Updated JRT to version 8.1.3
- Updated AdwCleaner to version 6.046
- Updated Malwarebytes 3.0 installer to version 3.0.6.1469-10103 (CU4.1)
- Added functionality to copy listed content displayed within the Details views under Inform, Scan Results, Repair Results, Summary, Scan Report, Repair Report and sidebar lists
- Fixed several bugs reported on the forums and directly from Techbench members



 
----------------------------------------------------------------------
 Malwarebytes Toolset v1.0.0.1045 Release Notes - 03/14/2017
----------------------------------------------------------------------
Changes/Improvements:
- Updated Malwarebytes Issue Scanner with repair/remediation capabilities and detailed detection/repair data for the following areas:
	- Default Service key missing (restores entire service key)
	- Default Service that uses the Parameters key is missing the Parameters key (restores entire service key)
	- Default Service start state set to something besides Automatic or Manual. (resets the Start value)
	- Default Service type set to something besides 32 or 16 (resets the Type value)
	- Default Service ServiceDll is missing or modified (resets the ServiceDll value)
	- Default File Association Extension has an HKCU override (deletes the key)
	- Default File Association Extension key is missing (restores the key)
	- Default File Association Extension (Default) value is set incorrectly (resets the value)
	- Default File Association Handler has an HKCU override (deletes the key)
	- Default File Association Handler key is missing (restores the key)
	- Default File Association Handler shell\open\command key is missing (restores the entire handler key)
	- Default File Association Handler shell\open\command (Default) value is set incorrectly (resets the value).
- Updated Printer Issue Scanner with improved messaging around stuck print jobs
- Updated BITS Issue Scanner to use higher priority to prevent potential timeout during test
- Updated OS detection to properly detect Windows 10 Education
- Updated Custom Scan to improve UI experience when adding custom files/folders
- Updated Process Killer to prevent 0x4F BSOD when Malwarebytes Whitelist is not used 
- Updated MyToolsEditor to be integrated into MBTS instead of being a standalone app
- Updated MyToolsEditor UI to align with MBTS standards
- Updated MSI binaries for Windows Installer Issue Scanner to be dependent on .net 4.0 instead of .net 4.5
- Updated JRT to version 8.1.2 (*UPDATED 03/14/2017*)
- Updated AdwCleaner to version 6.044
- Updated MBTSResource.dll to include version information
- Updated Malwarebytes 3.0 installer to version 3.0.6.1469-1075 (CU3)




----------------------------------------------------------------------
Malwarebytes Toolset v1.0.0.1010 Release Notes - 02/06/2017
----------------------------------------------------------------------
Changes/Improvements:

- Updated Malwarebytes Breach Remediation "Scan In Archives" setting to OFF by default
- Updated Malwarebytes Breach Remediation engine to version 1643 to improve scanning and remediation functionality
- Added detailed Network Adapter Information to the Details Sidebar for the Network > Windows Status > Internet Status entry in the Full Report (Network Connectivity Issue Scanner)
- Added improved PING functionality for IPv4 and IPv6 addresses to the Network Connectivity Issue Scanner.
- Increased PING attempts to 4 for each address in the Network Connectivity Issue Scanner
- Added average PING time in Details Sidebar for PING based test results of the Network Connectivity Issue Scanner
- Added PING error reporting to the Details Sidebar for PING based test results of the Network Connectivity Issue Scanner


----------------------------------------------------------------------
Malwarebytes Toolset v1.0.0.1009 Release Notes - 01/31/2017
----------------------------------------------------------------------
***ORIGINAL RELEASE VERSION***

Minimum System Requirements:
- Windows XP SP3 or Higher (Issue Scanner Does Not Support Windows XP, Windows Server, or Windows Insider Preview)
- .NET Framework v4 (Limited Functionality if Not Installed)
- Processor with SSE2 support
- 512 MB of RAM (1GB Recommended)
- Internet Connection (Only required for performing updates and initial 48 hour activation of Malwarebytes Breach Remediation)
- Run from a writable storage device (e.g. internal HDD/SSD, USB flash drive, external HDD/SSD, etc.)

Key Features Overview:
- Malwarebytes Issue Scanner (Windows OS issue identification only) added to Scan module to identify Windows OS Issues (Windows Vista+ only) in the following categories:
	- Device Manager Errors
	- Default Windows Services
	- Default File Associations
	- Group Policies
	- Network Connectivity
	- Winsock Integrity
	- WMI Integrity
	- Windows Installer Integrity
- Malwarebytes Breach Remediation integrated in to toolset's Scan module and GUI (aka Malware Scan)
- Custom Scan Configuration added to Scan module to customize Malwarebytes Breach Remediation based scans (Hyper, Threat, Full, Custom, Update Only, and Default Scan)
- Malwarebytes 3.0.6.1469 installer added to the toolset package and the Protect section of the Toolbox
- AdwCleaner 6.043 added to the toolset package and the Remediate section of the Toolbox
- MyTools Editor now includes a Batch Import function

Changes/Improvements:
- MBTSLauncher.exe added to the root of the toolset package to facilitate compatibility checking and enforce stability
- Toolset folder structure reorganized to support launcher capability and overall toolset stability
- Running Malwarebytes Breach Remediation from the Scan tab no longer opens a separate Command Prompt window
- Malwarebytes Toolset logo updated
- Command-Line Malware Scan (powered by Malwarebytes Breach Remediation) added to Remediate section of the Toolbox
- Command-Line Rootkit Scan (powered by Malwarebytes Breach Remediation) added to Remediate section of the Toolbox
- Launch Windows Defender Offline (Windows 10 v1511+ only) added to Remediate section of the Toolbox

Bug Fixes:
- Resolved USB flash drive compatibility issue
- Resolved Network Adapter crash issue
- Resolved Malwarebytes Breach Remediation issue that would frequently ignore keyboard input
- Resolved Malwarebytes Breach Remediation issue that would only remove small amounts of malware on systems with large infections

Functionality Limitations When .NET Framework v4 is Not Installed:
- Malware Scan will not function. Use the Command-Line Malware Scan on systems without .NET Framework 4.
- Some Issue Scanner features may not run.
